TP2 Touch Trigger Probe

This is the traditional slimline M8 threaded TP2-5 way switching probe for most applications. The small diameter, 13mm or 0.51", allows access into restricted areas. Its adjustable stylus force enables the probe to support a wide range of styli and extensions. Can be attached to the ends of the same diameter extension bars (PEL family) for longer reach. For manual or DCC applications.

Available in the 6-way configuration for minus-Z measurements.

Principal application Universal DCC and manual CMMs.
Sense direction 5-axis: ±X, ±Y, +Z
Unidirection repeatability maximum (2s µm) (at stylus tip) 0.35 µm (0.000014 in)
Pre-travel variation 360° (XY plane) ±0.80 µm (0.000032 in)
Weight *excluding shank and cable 22 g (0.78 oz)
Stylus range M2
Stylus force range (adjustable) 0.07 N - 0.15 N
Stylus force (set by Renishaw) 0.07 N - 0.08 N
Stylus overtravel (typical)

XY plane: ±14°

+Z axis: 4 mm (0.16 in) @ 0.07 N
3 mm (0.12 in) @ 0.15 N

Maximum extension on PH10 series 300 mm (11.81 in)
Mounting method M8 thread
Suitable interface PI 4-2, PI 7-2, PI 200, UCC