PH6M Fixed head with autojoint connector

CMM Style: Manual and DCC

The PH6M is a fixed head with autojoint connector for probes and adaptors, which is compatible with multiwired probes TP7M, OTP6M and SP600M, as well as the complete Renishaw probe range through the use of the PAA series of adaptors.

Compatibility
SP25M
TP7M
TP7M
TP7M
PAA Family of Autojoint to M8 adapters
PAA Family of Autojoint to M8 adapters
PAA Family of Autojoint to M8 adapters

Recommended Options
Autojoint to M8 bush extension bars

CMM Style: Manual and DCC

The PAA family of extension/adapters are used with autojoint probeheads such as PH10M PLUS to allow use of M8 threaded probe systems. Through the use of the PAA adapters, the CMM can easily switch bewteen scanning operations using a SP25 scanning probe to tactile touch operations using a TP20 or similar M8 threaded mount.

  Part Number Length / Description
PAA1 A-1051-0417 30 mm
PAA2 A-1051-0418 140 mm
PAA3 A-1051-0419 300 mm

Probe Extension Kit A-1047-7005

 
MCR20 Stylus Change Rack

CMM Style: DCC

The MCR20 stylus module changing rack provides rapid automatic change of modules without the need to re-qualify. Rack functions completely passive not requiring electrical connections. Installation and set up is simple with the aid of a set-up routine in Geomet properly locating the rack within the machine coordinates. The rack is mounted on a stem that is designed with built-in over travel that serves as crash protection.

The MCR20 comes with two modules (6 position rack). The rack can be configured for 2, 3, 4 or 6 ports which are covered with protective docking plates to shield the modules from dirt and debris.